Des pompes vide-fûts pour chaque application

Les pompes vide fûts Finish Thompson offrent une gamme complète pour rencontrer tous les besoins de l’industrie.
Produits chimiques, huiles, produits visqueux et corrosifs, traitement de l’eau …
Les pompes vide fûts Finish Thompson peuvent être équipées de moteurs adaptés aux besoins spécifiques de chaque application – moteurs électriques de différentes puissances, sur batterie ou sur réseau, IP24 ou IP54, ATEX ou FDA, moteurs à air comprimé – Finish Thompson offre une solution pour chaque application.

Les pompes vide fûts Finish Thompson sont construites en respectant les normes les plus sévères de qualité pour garantir à chaque application, la durabilité attendue au meilleur prix.

PF - High Performance
PFM
PFP
PFV
PFS
Motors
PFM
Available Lengths27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb w/ variable orifice
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow40 gpm (151 lpm)22 gpm (83 lpm)
Maximum Head80 ft (24 m)38 ft (11.6 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity2000 cP330 cP
Tube MaterialPolypropylene
Shaft Material316 stainless steel
O-ring MaterialFKM or EPDM
Impeller MaterialPVDF
Maximum Temperature160º F (71º C)
Minimum Temperature35º F(1.7º C)
PFP
Available Lengths27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb w/ variable orifice
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow40 gpm (151 lpm)22 gpm (83 lpm)
Maximum Head80 ft (24 m)38 ft (11.6 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity2000 cP330 cP
Tube MaterialPolypropylene
Shaft MaterialAlloy 625
O-ring MaterialFKM
Impeller MaterialPVDF
Maximum Temperature160º F (71º C)
Minimum Temperature35º F(1.7º C)
PFV
Available Lengths27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb w/ variable orifice
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow40 gpm (151 lpm)22 gpm (83 lpm)
Maximum Head80 ft (24 m)38 ft (11.6 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity2000 cP330 cP
Tube MaterialPVDF
Shaft MaterialAlloy 625
O-ring MaterialFKM
Impeller MaterialPVDF
Maximum Temperature*120º F (49º C)
Minimum Temperature35º F(1.7º C)
*PFV-72 maximum temperature is 115º F (46º C)
PFS
Available Lengths27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1 in (2.54 cm)
Discharge TypesHose barb, MNPT, FNPT, or tri-clamp
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow40 gpm (151 lpm)22 gpm (83 lpm)
Maximum Head80 ft (24 m)38 ft (11.6 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity2000 cP330 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
O-ring MaterialFKM, Buna, or Perlast
Impeller MaterialETFE
Maximum Temperature*220º F (100º C)
Minimum Temperature-20º F(-29º C)

*Perlast o-rings limit temperature to 5º F (-15º C)

Motors
ODP (Open Drip Proof), Splashproof, IP24 Variable Speed Motors
ModelCertificationRequirementsInput/Output(W)RPMMaximum Viscosity
M3VCSA115V/50-60Hz650/4003,500-10,000500 cP
M5VCE230V/50-60Hz650/4003,500-10,000500 cP
M5V-USCE230V/50-60Hz650/4003,500-10,000500 cP
M3V-UKCE115V/50-60Hz650/4003,500-10,000500 cP

*Suitable for 230V, 60 Hz. Includes NEMA 6-15 plug

TEFC (Totally Enclosed Fan Cooled) IP54 Motors
ModelCertificationRequirementsInput/Output(W)RPMMaximum Viscosity
M3TCSA115V/50-60Hz640/40010,000500 cP
M5TCE230V/50-60Hz640/40010,000500 cP
M58P-115V/50-60Hz1000/8005,000-10,000**2,000 cP
M59P-230V/50-60Hz1000/8005,000-10,000**2,00 cP

**Variable speed

Explosion Proof Motors
ModelCertificationRequirementsInput/Output(W)RPMMaximum Viscosity
M3XCSA115V/50-60Hz230/7510,00010 cP
M5X*CE230V/50-60Hz640/40010,00010 cP
M10XCE230V/50-60Hz1000/80010,000500 cP

*Suitable for hazardous areas that do not require independent verification
ATEX certified option available. Contact factory for more information.

Air Motors*
ModelCertificationRequirements>Input/Output(W)RPMMaximum Viscosity
M6CE80-100psi@15-32cfm400300-9,000330 cP
M6XCE80-100psi@15-32cfm600300-6,000330 cP

*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced.
ATEX certified option available. Contact factory for more information.

EF - Economy
EFP
EFV
EFS
Motors
EFP
Available Lengths16, 27, 40, 48, 54 in (41, 69, 102, 122, 137 cm)
Tube Diameter1-1/4 in (3.2 cm)
Discharge Size3/4 in (1.91 cm)
Discharge TypeHose barb
Hose Size3/4 in (1.91 cm)
 Electric MotorAir Motor12V Motor
Maximum Flow17 gpm (64 lpm)15 gpm (57 lpm)14 gpm (53 lpm)
Maximum Head20 ft (6.1 m)17 ft (5.2 m)13 ft (4 m)
Maximum Specific Gravity1.61.61.6
Maximum Viscosity300 cP300 cP100 cP
Tube MaterialPolypropylene
Shaft Material316 stainless steel
O-ring MaterialFKM or EPDM
Impeller MaterialPolypropylene
Maximum Temperature150º F (66º C)
Minimum Temperature0º F(-180º C)
EFV
Available Lengths16, 27, 40, 48, 54 in (41, 69, 102, 122, 137 cm)
Tube Diameter1-1/4 in (3.2 cm)
Discharge Size3/4 in (1.91 cm)
Discharge TypeHose barb
Hose Size3/4 in (1.91 cm)
 Electric MotorAir Motor12V Motor
Maximum Flow17 gpm (64 lpm)15 gpm (57 lpm)14 gpm (53 lpm)
Maximum Head20 ft (6.1 m)17 ft (5.2 m)13 ft (4 m)
Maximum Specific Gravity1.61.61.6
Maximum Viscosity300 cP300 cP100 cP
Tube MaterialPVDF
Shaft MaterialAlloy 625
O-ring MaterialFKM
Impeller MaterialETFE
Maximum Temperature160º F (71º C)
Minimum Temperature0º F(-180º C)
EFS
Available Lengths16, 27, 40, 48 in (41, 69, 102, 122 cm)
Tube Diameter1-1/4 in (3.2 cm)
Discharge Size3/4 in (1.91 cm)
Discharge TypeHose barb
Hose Size3/4 in (1.91 cm)
 Electric MotorAir Motor12V Motor
Maximum Flow17 gpm (64 lpm)15 gpm (57 lpm)14 gpm (53 lpm)
Maximum Head20 ft (6.1 m)17 ft (5.2 m)13 ft (4 m)
Maximum Specific Gravity1.61.61.6
Maximum Viscosity300 cP300 cP100 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
O-ring MaterialFKM
Impeller MaterialETFE
Maximum Temperature*212º F (100º C)
Minimum Temperature35º F(1.7º C)
*PFV-72 maximum temperature is 0º F (-180º C)
Motors
ODP (Open Drip Proof), Splashproof, IP24 Electric & Battery Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
S1 CSA 115V/60Hz 230/110 8,000/14,000 300 cP
S2 CE 230V/50-60Hz 230/110 8,000/14,000 300 cP
S3 CE 115V/50-60Hz 230/110 8,000/14,000 300 cP
S6 CE 12V 150/100 8,000/14,000 300 cP
Air Motors*
Model Certification Requirements> Input/Output(W) RPM Maximum Viscosity
S4 CE 40@27cfm -/370 300-11,000 330 cP
*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced. ATEX certified option available. Contact factory for more information.
TT - Mid-Performance
TTS
TTC
STTS
Motors
TTS
Available Lengths27, 40, 48 in (69, 102, 122 cm)
Tube Diameter1-1/2 in (3.81 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb, MNPT, or FNPT
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow10 gpm (38 lpm)16 gpm (61 lpm)
Maximum Head10 ft (3 m)30 ft (9 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity500 cP2000 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
Spacer MaterialFEP
Impeller/Compressor MaterialPTFE with stainless steel pin
Maximum Temperature150º F (66º C)
Minimum Temperature-20º F(-29º C)
TTC
Available Lengths27, 40, 48 in (69, 102, 122 cm)
Tube Diameter1-5/8 in (4.1 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow10 gpm (38 lpm)16 gpm (61 lpm)
Maximum Head10 ft (3 m)30 ft (9 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity500 cP2000 cP
Tube MaterialCPVC
Shaft MaterialAlloy 625
Spacer MaterialFEP
Impeller/Compressor MaterialPTFE with stainless steel pin
Maximum Temperature150º F (66º C)
Minimum Temperature34º F(1.1º C)
STTS
Available Lengths40 in (102 cm)
Tube Diameter1-1/2 in (3.81 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb or tri-clamp
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow10 gpm (38 lpm)16 gpm (61 lpm)
Maximum Head10 ft (3 m)30 ft (9 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity500 cP2000 cP
Tube MaterialFDA-compliant 316 stainless steel
Shaft MaterialFDA-compliant 316 stainless steel
Spacer MaterialFDA-compliant FEP
Impeller/Compressor MaterialFDA-compliant PTFE with stainless steel pin
Maximum Temperature*150º F (66º C)
Minimum Temperature-10º F (-23º C)
Motors
TEFC (Totally Enclosed Fan Cooled) IP54 Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M7T CSA 115V/50-60Hz 500/180 2,850/3,450 500 cP
M8T CE 230V/50-60Hz 500/180 2,850/3,450 500 cP
Explosion Proof Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M7X CSA 115V/50-60Hz 500/180 2,850/3,450 400 cP
Air Motors*
Model Certification Requirements> Input/Output(W) RPM Maximum Viscosity
M6 CE 80-100psi@15-32cfm 400 300-9,000 1500 cP
M6X CE 80-100psi@15-32cfm 600 300-6,000 2000 cP
*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced. Suitable for hazardous areas that do not require independent verification.
HVDP - High Viscosity
HVDP-HR
HVDP-LR
Motors
HVDP-HR
Available Lengths27, 40, 48 in (69, 102, 122 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1-1/2 in (3.8 cm) or 2 in (5.1 cm)
Discharge TypeHose barb or tri-clamp
Hose Size1-1/2 in (3.8 cm) or 2 in (5.1 cm)
 Electric Motor Only
Maximum Flow9 gpm (32 lpm)
Maximum Head300 ft (91 m)
Maximum Specific Gravity1.8
Maximum Viscosity20,000 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
Stator MaterialsBuna, FKM, or PTFE
Seal MaterialsCarbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®
O-ring MaterialsBuna, FKM, EPDM, or PTFE encapsulated silicone
Maximum Temperature180º F (82º C)
Minimum Temperature-20º F(-29º C)
HVDP-LR
Available Lengths27, 40, 48 in (69, 102, 122 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1-1/2 in (3.8 cm) or 2 in (5.1 cm)
Discharge TypeHose barb or tri-clamp
Hose Size1-1/2 in (3.8 cm) or 2 in (5.1 cm)
 Electric MotorAir Motor
Maximum Flow7 gpm (27 lpm)7 gpm (27 lpm)
Maximum Head300 ft (91 m)300 ft (91 m)
Maximum Specific Gravity1.81.8
Maximum Viscosity100,000 cP100,000 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
Stator MaterialsBuna, FKM, or PTFE
Seal MaterialsCarbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®
O-ring MaterialsBuna, FKM, EPDM, or PTFE encapsulated silicone
Maximum Temperature180º F (82º C)
Minimum Temperature-20º F(-29º C)
Motors
TEFC (Totally Enclosed Fan Cooled) IP54 Variable Speed HR Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M58H - 115V/50-60Hz 1000/800 5,000-10,000 20,000 cP
M59H CE 230V/50-60Hz 1000/800 5,000-10,000 20,000 cP
TEFC (Totally Enclosed Fan Cooled) IP54 LR Motors
Model Certification Requirements Input/Output(kW) RPM Maximum Viscosity
M60 * 115V/60Hz 0.75 3450 15,000 cP
M61 * 115V/60Hz 1.1 3450 30,000 cP
M62 * 115V/60Hz 1.5 3450 100,000 cP
M63 * 230V/50-60Hz 0.75 2850/3450 15,000 cP
M64 * 230V/50-60Hz 1.5 2850/3450 100,000 cP
*Carries independent testing laboratory approval. Note: Input power for induction motors will vary by manufacturer.
Explosion Proof Motors
Model Certification Requirements> Input/Output(W) RPM Maximum Viscosity
M67 * 115V/60Hz 0.75 3450 15,000 cP
M69 * 115V/60Hz 1.5 3450 100,000 cP
*Carries independent testing laboratory approval. Note: Input power for induction motors will vary by manufacturer.
Air Motors*
Model Certification Requirements Output(kW) RPM Maximum Viscosity
M65 CE 100psi@25cfm 0.55 300-3,000 15,000 cP
M66 CE 100psi@25cfm 1.1 300-3,000 100,000 cP
*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced. Suitable for hazardous areas that do not require independent verification.
BT - High Viscosity
BTS
Motors
BTS
Available Lengths40 in (102 cm)
Tube Diameter2 in (5.1 cm)
Discharge Size1-1/2 in (3.8 cm)
Discharge TypeHose barb
Hose Size1-1/2 in (3.8 cm)
 Electric MotorAir Motor
Maximum Flow10 gpm (38 lpm)10 gpm (38 lpm)
Maximum Head200 ft (61 m)200 ft (61 m)
Maximum Specific Gravity:1.81.8
Maximum Viscosity15,000 cP15,000 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
Spacer MaterialFEP
Compressor MaterialPTFE with stainless steel pin
Maximum Temperature200º F (93º C)
Minimum Temperature-20º F(-29º C)
Motors
TEFC (Totally Enclosed Fan Cooled) IP54 Motors
ModelCertificationRequirementsInput/Output(KW)RPMMaximum Viscosity
M15*230-460V/60Hz0.753450800 cP
M16*230-460V/60Hz1.117257,000 cP
M17*230-460V/60Hz2.2172515,000 cP
M27*115-230V/60Hz0.753450800 cP
M28*115-230V/60Hz1.517257,000 cP
M29*115-230V/60Hz2.5172515,000 cP
M39*220-380-440V/50-60Hz0.7528501,000 cP
M40*220-380-440V/50-60Hz1.514258,500 cP
TEFC (Totally Enclosed Fan Cooled) IP54 LR Motors
ModelCertificationRequirementsInput/Output(kW)RPMMaximum Viscosity
M60*115V/60Hz0.75345015,000 cP
M61*115V/60Hz1.1345030,000 cP
M62*115V/60Hz1.53450100,000 cP
M63*230V/50-60Hz0.752850/345015,000 cP
M64*230V/50-60Hz1.52850/3450100,000 cP

*Carries independent testing laboratory approval.
Note: Input power for induction motors will vary by manufacturer.

Explosion Proof Motors
ModelCertificationRequirements>Input/Output(W)RPMMaximum Viscosity
M67*115V/60Hz0.75345015,000 cP
M69*115V/60Hz1.53450100,000 cP

*Carries independent testing laboratory approval.
Note: Input power for induction motors will vary by manufacturer.

Air Motors*
ModelCertificationRequirementsOutput(kW)RPMMaximum Viscosity
M65CE100psi@25cfm0.55300-3,00015,000 cP
M66CE100psi@25cfm1.1300-3,000100,000 cP

*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced.
Suitable for hazardous areas that do not require independent verification.

TM - Drum Mixer
TMS
Motors
TMS
Available Lengths40 in (102 cm)
Tube Diameter2 in (5.1 cm)
 Electric MotorAir Motor
Maximum Circulation14 gpm (53 lpm)14 gpm (53 lpm)
Maximum Specific Gravity1.81.8
Maximum Viscosity1,000 cP1,000 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
Center Bearing MaterialPTFE
Maximum Temperature200º F (93º C)
Minimum Temperature-20º F(-29º C)
Motors
TEFC (Totally Enclosed Fan Cooled) IP54 Motors
ModelCertificationRequirementsInput/Output(W)RPMMaximum Viscosity
M7TCSA115V/50-60Hz500/1802,850/3,450500 cP
M8TCE230V/50-60Hz500/1802,850/3,450500 cP
Explosion Proof Motors
ModelCertificationRequirementsInput/Output(W)RPMMaximum Viscosity
M7XCSA115V/50-60Hz500/1802,850/3,450400 cP
Air Motors*
ModelCertificationRequirementsInput/Output(W)RPMMaximum Viscosity
M6CE80-100psi@15-32cfm400300-9,0001500 cP
M6XCE80-100psi@15-32cfm600300-6,0002000 cP

*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced.
Suitable for hazardous areas that do not require independent verification.

TB - Mid-Performance
TBP
TBS
Motors
TBP
Available Lengths27, 40, 48 in(69, 102, 122 cm)
Tube Diameter1.66 in (4.2 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb w/ variable orifice
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow20 gpm (75.7 lpm)12.5 gpm (47.3 lpm)
Maximum Head39.5 ft (12 m)19 ft (5.8 m)
Maximum Specific Gravity1.41.4
Maximum Viscosity200 cP200 cP
Tube MaterialPure polypropylene with pure PVDF pump head
Shaft MaterialAlloy 625
O-ring MaterialFKM
Compressor MaterialPTFE with Alloy 625 pin
Maximum Temperature150º F (66º C)
Minimum Temperature35º F(1.7º C)
TBS
Available Lengths40 in (102 cm)
Tube Diameter1-1/2 in (3.8 cm)
Discharge Size1 in (2.54 cm)
Discharge TypeHose barb
Hose Size1 in (2.54 cm)
 Electric MotorAir Motor
Maximum Flow20 gpm (75.7 lpm)15 gpm (57 lpm)
Maximum Head28 ft (8.53 m)16 ft (4.9 m)
Maximum Specific Gravity1.41.4
Maximum Viscosity200 cP200 cP
Tube Material316 stainless steel
Shaft Material316 stainless steel
Spacer MaterialFEP
Compressor MaterialPTFE with stainless steel pin
Maximum Temperature150º F (66º C)
Minimum Temperature-20º F(-29º C)
Motors
ODP (Open Drip Proof), Splashproof, IP24 Variable Speed Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M3V CSA 115V/50-60Hz 650/400 3,500-10,000 500 cP
M5V CE 230V/50-60Hz 650/400 3,500-10,000 500 cP
M5V-US CE 230V/50-60Hz 650/400 3,500-10,000 500 cP
M3V-UK CE 115V/50-60Hz 650/400 3,500-10,000 500 cP
*Suitable for 230V, 60 Hz. Includes NEMA 6-15 plug
TEFC (Totally Enclosed Fan Cooled) IP54 Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M3T CSA 115V/50-60Hz 640/400 10,000 500 cP
M5T CE 230V/50-60Hz 640/400 10,000 500 cP
Explosion Proof Motors
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M10X** CE 230V/50-60Hz 1000/800 10,000 500 cP
**Variable speed
Air Motors*
Model Certification Requirements Input/Output(W) RPM Maximum Viscosity
M6 CE 80-100psi@15-32cfm 400 300-9,000 330 cP
M6X CE 80-100psi@15-32cfm 600 300-6,000 330 cP
*An air motor is a non-electrical device meaning possibility of explosion from igniting flammables is reduced.
Accessories

Afrequip conveniently offers a variety of centrifugal and drum pump accessories designed to enhance any pump system.

  • Flow Meters – Flow meters are offered exclusively for Afrequip model PFP, PFV, and PFM drum pumps. Available in polypropylene or PVDF, our flow meters offer options providing the rate at which fluids are pumped or the total number of gallons (or liters) pumped as well as an option to shut off the pump after a pre-determined batch has been pumped.
  • Static Protection Kit – A static protection kit, combined with a metal tube drum pump and appropriate motor, is designed to provide a high level of protection when pumping flammable liquids by helping to prevent the accumulation of static charge when transferring flammable or combustible liquids.
  • Nozzles – Nozzles are available in a variety of styles and materials to assist with flow control and dispensing of fluids.
  • Discharge Tubing – Discharge hose for dispensing fluid is available for all Finish Thompson drum pump models.
  • Miscellaneous – Finish Thompson also offers a variety of other drum pump accessories, including inlet strainers, drum adapters, hose clamps, and wall mount brackets.

Les raisons de commander chez Afrequip

  • Des prix très compétitifs
  • Un service de tous les instants
  • La garantie de pièces de rechange de qualité
  • Les conseils techniques
  • Support technique sur site
  • Grand stock disponible